Nixeus Forum Community

Here is a list of verified Wireless-N dongles that will work with the Nixeus Fusion XS (NX-500):

Alfa Network (AWUS036NEH)
AZIO (AWU101N)
EDIMAX (EW-7711UTn)
Intellinet 150N Model 524698/524438
Zonet ZEW2545
Rosewill RNX-EasyN1 Wireless-N 4.0 Dongle

PLEASE NOTE:
Nixeus does not endorse any suggested third-party products. The information above is provided as is, with no guarantee of the effectiveness or reliability. Nixeus does not guarantee that the suggested adapters will be fully functional and compatible at all times. Nixeus assumes no responsibility with regard to the selection, performance, or use of third party products. All understandings, agreements, or warranties, if any, take place directly between the vendor and prospective users.

Feel free to add more to this thread and I will update the list.

I said I would reply back on the ncix forum about the Wireless wifi

I confirm the Rosewill RNX-EasyN1 Wireless-N 4.0 Dongle Works perfectly , I just pluged it and it automaticly detected .


http://www.newegg.ca/Product/Product.as ... -_-text-_-

I live in Thailand so the Fusion XS was not so easy to get but now I have one. When I was looking and considering what player to buy I could not decide and with no experience I decided to try the XS. I inquired with the Nixeus support about using a wireless adapter. As there is no comprehensive list of adapters that have been tested support just told me the chipset being used was pretty common so the adapter I have most likely would work.

I went ahead and ordered the XS. Of course now that I have it (3 days) the first thing was to plug in the wireless adapter I have and try it.

Adapter unit:

ZyXEL NWD-270N Wireless N-Lite USB Adapter

I plugged the 270 in to the USB port and powered up the unit

After booting I went to network set up and changed to wireless type and almost immediately the XS found my wireless network. I configured my security password and the XS and 270 started searching and within a minute the XS showed a green lock indicator. Now in 3 days the unit seems to function good. I use the wireless to stream from my NAS server and also to connect to the internet. So far so good.

So at this point I can say for me the XS works with this adapter

Update to my posting yesterday.

I spoke to soon about the Zxyel adapter working good. After using for 2 days the Fusion XS was at the old level of firmware 1.33 so I used the units update feature and down loaded the newest version 1.46. Now not only do I have trouble connecting using the adapter the whole XS is doing weird stuff,,,,,,,too many little annoying things to describe. I will attempt to go back to 1.42 and see what that does.

So now a few more days and no words of wisdom from Fusion support about possible issues with the 1.46 or any version I can download.

IO have been playing around with both the XS set up and my adapter settings and now I have found something that seems to connect and stay connected. I had one dis connect last night during a movie and I had to re-boot the XS to connect again. Don't know what or why but my network was still up and my Dreambox was still up when the disconnect happened so I blame the XS/adapter itself

Hi Longball,

Did you download and install the new beta firmware version 01.52.00.32.10 that I sent you? I think one of the fixes in that firmware is when the adapter gets disconnected it will auto reconnect.

Yes installed the day you sent it.

Have not tried the adapter yet.

Next chance I will try it again

Hi , I am in Sydney. I need to know which USB wi-fi dongle is compatible with Nixeus Fusion XS.
Please help me.

I bought the Rosewill RNX-EasyN1 Wireless-N 4.0 Dongle on newegg.com. It works for sure.

Thank you for reply. But I can not find that product in Sydney.